6월 . 21, 2024 19:06 다시 목록으로

How to use the hand pallet truck?

Before using the hydraulic truck, please make sure that all parts of the vehicle are intact, especially the hydraulic system and wheels. Check the oil level of the hydraulic pump to make sure it is within the normal range. At the same time, check whether the wheels rotate freely without jamming.

During operation, move the truck smoothly under the goods to ensure that the weight of the goods is evenly distributed on platform of the two forks of the pallet truck. According to the size and shape of the goods, the height of the platform can be adjusted appropriately to ensure that the goods are stable.

When it is necessary to lift the goods, the force pressed on the handle should be even, not too hard. As the handle is depressed, the hydraulic system will slowly raise the platform. When the load has risen to the desired height, the carrier will automatically lock at that height to ensure the load is safe and stable.

When pulling the truck, maintain a steady speed and avoid sharp turns and stops. When driving, try to avoid bumps and depressions on the ground to avoid damaging the wheels or tipping the load.

Upon arrival at the destination, gently depress the hydraulic pedal to slowly lower the bed. After the load touches the ground, carefully pull the pallet truck out from under the load to complete the handling task.

In conclusion, the correct use of hand pallet trucks can not only improve work efficiency, but also ensure the safety of operation. Follow the above steps to make your handling work easier and more convenient!

공유하다

block lever10

최근 뉴스